How to flash SPD android with UpgradeDownload/ResearchDownload

The flashing of spreadtrum Android phones is a simple process provided you have the required stock rom for your device. You can download some from here.
Also, you will need spreadtrum drivers installed in your computer for the flash tool to be able to communicate with your device. Below is a simple guide on how to flash your android with ResearchDownload tool.

Requirements :

•  SPD USB DRIVERS 
• A LAPTOP OR PC
• A USB CABLE

Procedure:

• Download and install spreadtrum usb drivers in your computer.
• Download the specific rom for your spd device and extract Check here for available roms here. The spd firmware file to be loaded with the flash tool is a .PAC FILE
• Now download and install Research download from the link given below. Extract it and click on ResearchDownload.exe as on the screenshot below

• Run ResearchDownload.exe and once in the dashboard, to load the firmware file, click on the 'gear' icon at the topleft corner as shown below to locate the stock rom.

• After loading firmware file press on the play button to start flashing, turn off your device and remove the battery. Reinsert battery and press bootkey(vol- or vol+) then connect phone to pc via usb.
• The flashing process should start if you have drivers well installed and your usb ports functions correctly.

• When the proccess is completed, you will get a 'PASSED' message as showned below.

SPD FLASH TOOL: SPD Upgrade Download R2.9.9005

The SPD Flash Tool is a software used to load firmware into SPD(SPREADTRUM) based Android devices.
SPD Androids have a firmware file with the .pac extension. Note that this tool is design specifically only for spreadtrum Androids.

SPD ResearchDownload/ResearchUpgrade is supported by Windows; XP, VISTA, WINDOWS 7, 8, 8.1 and 10.

Here in this article, we provide you with the download link for SPD ResearchDownload R2.9.9.005.

How to install

 This flash tool requires no special installation since it is just an executable file. To use, all you need to do is extract and run the setup.

  Requirements to use

 To use this flash tool, you will need;

• A PC or Lapto
• USB cable
• SPD USB drivers   
• And the stock rom for your device.

FLASHING GUIDE: See how to flash spd devices from here

Download link

Download from the link below

   

SPD UpgradeToolR2.9.6004

The SPD Flash Tool is a software used to load firmware into SPD(SPREADTRUM) based Android devices.
SPD Androids have a firmware file with the .pac extension. Note that this tool is design specifically only for spreadtrum Androids.

SPD ResearchDownload/ResearchUpgrade is supported by Windows; XP, VISTA, WINDOWS 7, 8, 8.1 and 10.

Here in this article, we provide you with the download link for SPD ResearchDownload R2.9.6004

How to install

 This flash tool requires no special installation since it is just an executable file. To use, all you need to do is extract and run the setup.

  Requirements to use

 To use this flash tool, you will need;

• A PC or Lapto
• USB cable
• SPD USB drivers   
• And the stock rom for your device.

FLASHING GUIDE: See how to flash spd devices from here

Download link

Download from the link below

   

HOW TO FLASH WITH SP FLASH TOOL

SP flash tool is an application which is mainly help you to flash Stock ROM, Custom recovery and fixing in some extreme cases ( firmware update, Flash recovery, unbrick bricked android device etc.).  SmartPhone FlashTool is working with MediaTek Android smartphones (MTK based) You can Download SPFlashTool from our download section. You need to load scatter file for MTK based device for functioning.

SP FLASH TOOL PREREQUISITES

• Pc or Laptop
• USB data cable
• MediaTek USB VCOM drivers
• Stock rom for your device to be flashed.

FLASHING PROCEDURE:

•  Start by installing Android USB Driver on your computer. You will not need to do this again if the drivers are already installed on your Computer. 

• Next switch Off your Android  and remove the Battery.

• Extract your downloaded rom to your PC.

• Extract SP Flash Tool on your Computer.

• Open Flash tool.exe.  and execute.

• Once SP Flash Tool is launched, Click on the Download tab(1).
• In the Download tab, click on the scatter-loading button(2).
• Locate the Scatter File from your extracted rom folder. After loading scatter, chose the flashing mode by clicking on the dropdown menu indicating Download(3)
• Click  then on the Download Button(4) to begin the Flashing Process.
• Connect your Smartphone to the Computer using USB Cable with or without battery if it you wish.
• Once the Flashing is completed, a Green Ring will appear. Now you have successfully flashed you phone.